wrapper

 
(495) 526-63-63
E-MAIL: OFFICE@VNIIFTRI.RU

  • :
  • :
  • .
21.04.2019

 

РУС/ENG        
Since its inception, the pilot plant located on the territory of the FSUE “VNIIFTRI” was a separate division and became part of the FSUE “VNIIFTRI” in the process of reorganization conducted in 2007. From the moment of its foundation, the main task of the pilot plant was the manufacture and maintenance of a fleet of state standards operated by FSUE VNIIFTRI, and the production of measuring instruments developed by the FSUE VNIIFTRI divisions.

At present, the pilot production technical center (OPTC) is a structural subdivision of FSUE VNIIFTRI. Experimental production - technical center of FSUE “VNIIFTRI” has modern automated stands for designing and prototyping products, modern production base including more than 100 machines and installations (including with numerical program control), modern stands (including automated ones) for the organization and conduct of the intermediate and output control parameters of the products.

OPTC units are located in several production buildings with a total area of ​​more than 2,000 m2. All the activities of the OPTC and its subdivisions are conducted in strict accordance with the quality management system in force at FSUE “VNIIFTRI”, all products are subject to acceptance by the Quality Control Department.

Starting in 2015, the OPTC units provide for the serial production of more than 20 types of measuring instruments and related products supplied to enterprises - consumers located both in the Russian Federation and abroad.
  • Maintenance of the processes of operation and modernization of state standards and stands of FSUE "VNIIFTRI";
  • Production and supply of measuring instruments and related products;
  • Development of design and technical documentation for equipment, devices, their components and modules on the basis of technical specifications;
  • Development of specialized application software for solving complex engineering problems, software interfaces of measuring instruments;
  • Development and production of technological stands for the organization of assembly, configuration, output control of measuring instruments and related products:
    • Electromagnetic screens;
    • Shielded boxes, cabinets and cameras;
    • Stands for ensuring the set climatic parameters;
    • Pressure chambers;
    • Devices to reduce vibration loads and specialized designs;
    • Dielectric furniture and supporting structures;
  • Organization of pilot and serial production of measuring instruments and related products;
  • Organization of experimental and serial production of radio-electronic equipment, devices, their composite modules and related products;
  • Development of new types of products, as well as modernization of existing products in the core fields of activity of FSUE "VNIIFTRI", in accordance with the appeals of consumers;
  • Repair of electronic measuring instruments and related products;
  • Development and production of special laboratory furniture to ensure the specified parameters of operation of measuring instruments:
  • Manufacturing specialized packaging to ensure the specified conditions of transportation of measuring instruments and responsible products.
  • An integrated approach to working with customers:
    • Full support of work with the Customer from circulation to the shipment of finished products;
    • Strict adherence to deadlines;
    • The provision of guarantees for products and services;
    • Post-warranty service.
  • The optimal approach to product development:
    • Extensive practical experience of specialists in the development of a wide range of products;
    • The optimal time frame for the development of design documentation for the time of receipt of the TK (TTZ) or sketches;
    • An integrated approach that takes into account a wide range of problems in the development of complex and high-tech equipment;
    • Development (revision) of products, design documentation and software for TK;
    • Development and production of products with special requirements to ensure the specified characteristics.
  • The possibility of organizing serial / small batch / piece / pilot production of various types of products:
    • Practical experience of mass production of the range of devices and measuring instruments;
    • Availability of technology for automated control of the parameters of manufactured products;
    • Mechanical processing of a wide range of materials, including titanium and precision alloys;
    • The ability to manufacture parts of large sizes (diameter up to 1200 mm);
    • Great practical experience in the manufacture of gears and mechanisms based on them;
    • Powder coating of large parts;
    • Practical experience in the development of packaging and packaging for measuring instruments and important products;
    • Multistage interoperable quality control;
  • Implementation of warranty and post warranty repair of measuring instruments and a wide range of electronic equipment.
  • Support of the activities of the structural units of FSUE "VNIIFTRI" and its branches in the following parts:
    • development, manufacturing and modernization of units and blocks of standards and measuring instruments;
    • repair of measuring instruments, instruments and electronic equipment.
  • Accompaniment of R & D conducted by structural subdivisions of FSUE “VNIIFTRI” and its affiliates in terms of prototyping and pilot production of developed products, including technological support for production;
  • Technical support of production and testing, as well as commissioning of products developed in the framework of research and development;
  • R & D on the creation of measuring instruments, instruments, as well as their elements;
  • Organization of serial and pilot production of measuring instruments and related products;
  • The organization of delivery of measuring instruments to enterprises - consumers, as well as warranty and post-warranty product support.

Special Design Bureau (SKB):

  • Development of design and other technical documentation in full compliance with the requirements of ESKD and GOST on the basis of:
    • technical assignments;
    • sketches;
    • product samples;
  • 3D product modeling, testing technology and product collection;
  • Digitization of drawings and design documentation;
  • Participation in the preparation of TZ with customers;
  • Development of software for various types of operating systems and a set of software documentation on the basis of technical specifications in full compliance with the requirements of ESPD and relevant GOST;
  • Clarification, refinement and optimization of design and technical documentation for the organization of pilot and serial production of products;
  • Development of design documentation for the construction and manufacture of means of production and technological stands for setting up and setting up products;
  • Development of an existing product upgrade program;
  • Development of new types of products, as well as modernization of existing products in the core fields of activity of FSUE "VNIIFTRI", in accordance with the appeals of consumers;
  • The organization of tests to confirm the specified characteristics of products, with the refinement of design documentation on the basis of tests;\
  • Development of a set of operational documentation.


   

Technological Bureau:

  • Technological preparation for the production of new products.
  • Development of technological documentation and organization of provision of workshops, sites and other production units with technological documentation;
  • Control of compliance with the established technological processes in the production process;
  • Development and implementation of measures to ensure quality and repeatability in small-scale and serial production of products;
  • Development and implementation of measures to reduce the cost of production per unit;
  • Optimization of production capacity;
  • Development and implementation of new technological processes and production technologies.
 

Mechanical assembly shop:

  • Serial production of products developed by SCB OPTC;
  • Production of products and designs including the following types of technological operations:
    • Milling;
    • Turning;
    • Boring work;
    • Gear cutting;
    • Heat treatment of metals;
    • Metal grinding;
    • Processing of metals of large diameters;
    • Metal bending;
    • Welding;
    • Laser engraving;
    • Electroplating;
    • Powder coating;
    • Locksmith work.
  • Production of experimental and mock-up product samples according to the design documentation.
  • Carrying out commissioning and installation works.


 

Instrument shop:

  • Serial, small-scale and pilot production of instruments and measuring instruments;
  • Assembling, diagnostics and repair of electronic equipment in compliance with the requirements of ESD (GOST R 53734 (IEC 61340));
  • Production of electronic products: electronic boards, electronic components and modules in compliance with the requirements of ESD (GOST R 53734 (IEC 61340);
  • And the preparation of experimental and mock-up product samples for design documentation;
  • Organization of tests to confirm the product characteristics;
  • Setting up and commissioning of electronic devices, measuring instruments and equipment;
  • Making harnesses and cables;
  • Carrying out all types of repair and restoration of a wide range of measuring instruments.


 

Tarno - carpentry plot:

  • Design and manufacture of special laboratory furniture and dielectric structures;
  • Development and manufacture of containers for various conditions of storage and transportation of measuring instruments, instruments and other equipment;
  • Production of body products for various equipment;
  • Manufacturing of standard designs and furniture elements.
 

Interim head of OPTC

Sharapov Sergey Vladimirovich

tel .: +7 (495) 526-63-36 ext.25-61

tel .: +7 (906) 029-74-63

e-mail: sharapov@vniiftri.ru

 

Clerk

Zhulina Olga Alexandrovna

tel .: +7 (495) 526-63-36 ext.93-62

fax: +7 (495) 944-53-83

e-mail: goa@vniiftri.ru

e-mail: optc@vniiftri.ru

 

Sales department OPTC

Tel. / Skype / Viber / WhatsApp: +7 (903) 145-95-17

 

department manager

Dudina Irina Viktorovna

tel .: +7 (495) 944-63-36 ext.26-96

e-mail: dudina@vniiftri.ru

 

department manager

Karachun Igor Evgenevich

tel .: +7 (495) 944-63-36 ext.24-90 

e-mail: karachun_ie@vniiftri.ru

 

Head of Mechanical Assembly Shop

Lukyanov Igor Nikolaevich

tel .: +7 (495) 526-63-36 ext.27-07

e-mail: lukyanov_in@vniiftri.ru

 

Head of Special Design Bureau

Sangalov Dmitry Alexandrovich

tel .: +7 (495) 526-63-36 ext. 93-58

e-mail: sda@vniiftri.ru

 

Head of Instrument Shop

Nukraev Alexander Nikolaevich

tel .: +7 (495) 526-63-36 ext.26-73

e-mail: nukraev@vniiftri.ru

 

Master of the carpentry site

Buinitsky Vladislav Iosifovich

tel .: +7 (495) 526-63-36 ext.94-61

e-mail: tsy@vniiftri.ru